Remove brake vacuum pipe
Having problems removing the brake vacuum pipe from either intake manifold or brake master end. Is there an easier way than pulling the pipe off the connectors, since it's hardened with time and seems stuck.
Hi borrow the wife's hairdryer or use a heat gun...or if you do not mind a puddle boiling water ...applied to the ends over the fittings ...use same method when re - installing.....dip end in boiling water and push over fitting
JOIN THE GWOA
This website and forum are provided for the benefit of enthusiasts and owners of all Mercedes Benz off road vehicles, in particular the G Wagen. The costs of development, upkeep and provision of the site are met entirely by the annual subscriptions of club members. If you are using the site and are not a member of the G Wagen Owners Association please consider joining. You will have access to areas on the site that are not open to non members, to club trips and meetings and to technical assistance. In addition your contribution (only £25 annually) will help us maintain and develop our website for future users.
Who's new
- Breniq
- Roscoe25
- RozzaTS
- Awon
- f.ecoheat
Thanks again for a common sense answer to the problem. I am off the spanners for the weekend but will give it a try this week.