Rear Bumper with Step

9 replies [Last post]
josephtt
josephtt's picture
Offline
Joined: 31.03.2008
Location: East Dulwich, London

Hello everyone It's good to finally be a proud owner of a 1989 300GD LWB G it's been a long time coming. My rear bumper is very rusty and in need of replacing. I am looking for a new or second hand rear bumper with step. Would be very much appreciated if any one could help.
Cheers
Joe T

josephtt
josephtt's picture
Offline
Joined: 31.03.2008
Location: East Dulwich, London
Re: Rear Bumper with Step

Actually not too fussed about the step just rear bumper with number plate in the middle. Thanks again.

fixwin38
fixwin38's picture
Offline
Joined: 09.07.2006
Location: northern ireland
GWOA Groups: Members
Re: Rear Bumper with Step

Hi Joseph if your G' is a 1989 model 460 it should have a bumper section on each side of the towhitch with the number plate mount on the near side section...could have been modified to a G' model 463 bumper in which case it is one piece with the number plate in the middle.....

mgrays
mgrays's picture
Offline
Joined: 08.11.2005
Location: Aberdeen Scotland
GWOA Groups: Members
Re: Rear Bumper with Step

Unless you have one of the rare mid numberplates for 460;

http://www.gwoa.co.uk/index.php?name=Forums&file=viewtopic&t=5413

I have a new modified Merc panel mid panel and ebay had someone selling a driver's side 1/4 to match it.. but that still would leave a passenger's side 1/4 to match it to be found.

Trouble is the modified Merc mid panel does not let you use the stock towbar and socket :cry: (so I am doing my own mounting). The original mid panel was better but still was not perfect. These are not compatible with the standard 1/4 bumpers which are rounded in the middle compared to the square cut ones required.

josephtt
josephtt's picture
Offline
Joined: 31.03.2008
Location: East Dulwich, London
Re: Rear Bumper with Step

Hi guys sorry all a bit new to this. it is a 460 ch No, I have the two bumpers either side of the tow bar with the number plate and light on the near side with corner and the same the other side. so looking for one that goes straight across if poss. i will send a picture thanks for getting back

hus55
hus55's picture
Offline
Joined: 10.01.2006
Location: north cyprus
GWOA Groups: Members
Re: Rear Bumper with Step

pm shakir, he lives in london and has an array of 460 bits and bumpers!

good luck.

josephtt
josephtt's picture
Offline
Joined: 31.03.2008
Location: East Dulwich, London
Re: Rear Bumper with Step

Thank you i will track him down

fixwin38
fixwin38's picture
Offline
Joined: 09.07.2006
Location: northern ireland
GWOA Groups: Members
Re: Rear Bumper with Step

a 463 model G' wagon rear bumper might suit your purpose..but it will reduce your very original G' to non-standard..you can get a rectangular pad/step with chequerplate grip that fits onto the top of the offside bumper which does not detract from the original bumper configuration......

josephtt
josephtt's picture
Offline
Joined: 31.03.2008
Location: East Dulwich, London
Re: Rear Bumper with Step

I like the sound of that where could I get one?

fixwin38
fixwin38's picture
Offline
Joined: 09.07.2006
Location: northern ireland
GWOA Groups: Members
Re: Rear Bumper with Step

Hi the step shows as a separate item on my MB microfiche ...might be GBP 30 or less from MB.......