part numbers reqiured for an early 463 front bumper

12 replies [Last post]
hus55
hus55's picture
Offline
Joined: 10.01.2006
Location: north cyprus
GWOA Groups: Members

i need the part no's for the following items;

1- number plate holder that lifts up to reveal the tow pin.

2-fog light surrounds(plastic frames the fogs sit in)

rgds hus55

mortinson
mortinson's picture
Offline
Joined: 06.11.2003
Location: Old beehive, Madrid, Spain
Re: part numbers reqiured for an early 463 front bumper

1- number plate holder that lifts up to reveal the tow pin.

A4638850043 Plate
A4638800814 Bracket (folding, to be welded to bumper) x 2

2-fog light surrounds(plastic frames the fogs sit in)

A7638850022 Bumper joint cover left
A7638850122 Bumper joint cover right

hus55
hus55's picture
Offline
Joined: 10.01.2006
Location: north cyprus
GWOA Groups: Members
Re: part numbers reqiured for an early 463 front bumper

cheers buddy :wink:

hus55
hus55's picture
Offline
Joined: 10.01.2006
Location: north cyprus
GWOA Groups: Members
Re: part numbers reqiured for an early 463 front bumper

another one to pick your brain mortinson!

do you know or would you have the part number for the round plastic nut that holds your nudge bar locked in the upright position :?: :?:

its the one you loosen with that unusual spanner......i have lost one of mine in transport and need help in replacing them.

please help :!: :!:

David Watkins
David Watkins's picture
Offline
Joined: 22.11.2003
Location: North Manchester Bacup Lancs
GWOA Groups: Members
Re: part numbers reqiured for an early 463 front bumper

Hussain,
i might have what you need at work in one of my G files, if i remember i will fax you a detail. Do you have a fax no?
David.

hus55
hus55's picture
Offline
Joined: 10.01.2006
Location: north cyprus
GWOA Groups: Members
Re: part numbers reqiured for an early 463 front bumper

cheers david,but i have no fax.

David Watkins
David Watkins's picture
Offline
Joined: 22.11.2003
Location: North Manchester Bacup Lancs
GWOA Groups: Members
Re: part numbers reqiured for an early 463 front bumper

Good Morning Hussain,
Okay then i will have to scan it and forward as an attachment to you via e-mail.
Is this your mail address:hus55@hotmail.co.uk
David.

hus55
hus55's picture
Offline
Joined: 10.01.2006
Location: north cyprus
GWOA Groups: Members
Re: part numbers reqiured for an early 463 front bumper

yes david.

David Watkins
David Watkins's picture
Offline
Joined: 22.11.2003
Location: North Manchester Bacup Lancs
GWOA Groups: Members
Re: part numbers reqiured for an early 463 front bumper

Hi Hussain,
Okay, just scaned what i have and i am also sending a paper copy by post for you.
I did notice when i was copyiong the orignal manufactures brochure that the do do some sort of stabliser lock so you can carry or sit on the bull when down, perhaps if you make enquires back to the source you could ask the question for me! and possably get hold of a new brochure for me!
The digtial images will be with you very soon regards David.

hus55
hus55's picture
Offline
Joined: 10.01.2006
Location: north cyprus
GWOA Groups: Members
Re: part numbers reqiured for an early 463 front bumper

cheers david,is there a uk supplier for these bull bars?

yes i have also seen the stabilisers,they look quite neat :lol:

David Watkins
David Watkins's picture
Offline
Joined: 22.11.2003
Location: North Manchester Bacup Lancs
GWOA Groups: Members
Re: part numbers reqiured for an early 463 front bumper

No only German sorry to say. The copy of the leaftlet is one i picked up when at a 4x4 show in Munich quite a few years ago , these guys supply MB Direct.
Sorry i dont have the actual part no for the opart you require, but your local dealer should be able to locate you one for sure if you quote or show him the scaned parts brake down i sent you.
As a last resort Jesus has a system that will find it for you for sure via the internet!
Regards DAVID.

mark
mark's picture
Offline
Joined: 06.11.2003
Location: England
GWOA Groups: Committee, Members
Re: part numbers reqiured for an early 463 front bumper

Be interesting to see if MB will still supply a bull bar, with the new legislation of 25/5/07,. May be ok if they have them in stock, who knows :? ..

David Watkins
David Watkins's picture
Offline
Joined: 22.11.2003
Location: North Manchester Bacup Lancs
GWOA Groups: Members
Re: part numbers reqiured for an early 463 front bumper

Only available from Germany i beleive?