A panel replacement (between front wing and door)
Removed my rubber strips covering sills and have found holes where A panel overlaps sills.
When I remove A panel am I likely to find sill holed too? Anybody had this problem and can offer advice? Part numbers? Dealer discounts on genuine panels?
Also holed where rear wing attaches to sill, is it time for a for new wings?
Cheers Andy
Hi,
This panel can be bought from Mercedes. You need to remove the following parts:
* Front door
* Front wing
* Lower alu list alongside "water gutter" in front of the door.
Use a 10mm HSS drill to "grind" each spot weld together with grinder, hammer and chissel.
when you remove front wing you have the bolts that run along the top. you also have 2 larger bolts inside the wing attaching it to the bulk head.
JOIN THE GWOA
This website and forum are provided for the benefit of enthusiasts and owners of all Mercedes Benz off road vehicles, in particular the G Wagen. The costs of development, upkeep and provision of the site are met entirely by the annual subscriptions of club members. If you are using the site and are not a member of the G Wagen Owners Association please consider joining. You will have access to areas on the site that are not open to non members, to club trips and meetings and to technical assistance. In addition your contribution (only £25 annually) will help us maintain and develop our website for future users.
Who's new
- Jaffa_JIM_23
- Wrabstar
- GG
- KTMSCANIA22
- 280ge
