Front Diff locks?
Any ideas, why the front diff lock leaver is jammed and unable to pull it while stationary?
But the back one is ok comes up fine (with a bit of brute force)
Not tried for real (off road) as yet.
Mine did that the other day, a bit of WD40 on the linkage underneath and it was fine again!
Worth a try :D
Richard
or the cylinder could be seized through lack of use, always good to pull them up every week whilst staionary to keep them free.
They sit sort of on the right as you lie underneath your G, you can recognize them by two spring things attached to them ( I am not very technical :D )
Just spray them and see what happens
Richard
JOIN THE GWOA
This website and forum are provided for the benefit of enthusiasts and owners of all Mercedes Benz off road vehicles, in particular the G Wagen. The costs of development, upkeep and provision of the site are met entirely by the annual subscriptions of club members. If you are using the site and are not a member of the G Wagen Owners Association please consider joining. You will have access to areas on the site that are not open to non members, to club trips and meetings and to technical assistance. In addition your contribution (only £25 annually) will help us maintain and develop our website for future users.
Who's new
- Jaffa_JIM_23
- Wrabstar
- GG
- KTMSCANIA22
- 280ge
Cheers mate for that, will get the wd40 out over the weekend!
Is it the same linkage as the three gear selector rods one? under the gear lever?