Starter Motor O Ring seal
Replacing my starter motor on a OM617, the new starter didn't come with a new O-ring and I can't seem to find a part # on the EPC (the item 'Seal ring' A0089979148 that is shown on the EPC is actually the Oring seal that goes between the 2 halves of the started motor body).
The old O-ring had perished to a point where I can't measure it, but the specs look something like a 85mm x 3mm
Does anyone know what the part number is for the original though ?
Hi
If you have EPC?
Starter is shown on the first picture of Group 15 Engine Electrical.
If you look at picture 105 on Group 15 (should be the 4th picture out of 5)
Item 20 shows a gasket, rather than an O ring, part number A102 151 01 80 that is available from MB Germany
they are £2.65 + vat and is valid for your chassis number.
Hope this helps
Gav
I have used silicone seal to substitute for the o-ring or gasket.
Regards,
JOIN THE GWOA
This website and forum are provided for the benefit of enthusiasts and owners of all Mercedes Benz off road vehicles, in particular the G Wagen. The costs of development, upkeep and provision of the site are met entirely by the annual subscriptions of club members. If you are using the site and are not a member of the G Wagen Owners Association please consider joining. You will have access to areas on the site that are not open to non members, to club trips and meetings and to technical assistance. In addition your contribution (only £25 annually) will help us maintain and develop our website for future users.
Who's new
- Jaffa_JIM_23
- Wrabstar
- GG
- KTMSCANIA22
- 280ge
Thanks Gav.
I couldn't find that part listed at all on the Russian sites for my vehicle, though it does show up I see for later models www.neoriginal.ru/cat/mb/part__2_1_503_603_931_/15_015_463_1_931_603_931 Peter (Fixwin) here also said they dropped this gasket for later starters so that is also a possibility. I've ordered this part anyway since it is cheap enough to take a punt. Thanks for the help!