Ignition - not start GD350

5 replies [Last post]
arvalente
arvalente's picture
Offline
Joined: 05.04.2009
Location: Portugal

Hi,

I've returned from ym trip to Morocco desert, I had a rollover on the dunes, only roof top a bit smashed.

Problem is now I'm not able to start on the key.

I went to check the socket of the automatic transmission, as sometimes in Park I had some problem.

When I shift to Neutral it used to start but now not in Neutral or Park.

I went to check and I have current on the socket of the gearbox.

I've been able to start engine with a connection to battery.

Any ideas?

Help is appreciated.

 

Login or register to view attached files
gav.helme
gav.helme's picture
Offline
Joined: 29.04.2011
Location: North Lincolnshire
GWOA Groups: Members
Re: Ignition - not start GD350

Sounds like the Starter Lock Out Switch on the left side of the Gearbox unless the Gear Lever bent in the roll and is not registering true Neutral or Park on the switch...long shot!!!

Gav

tony.bruegger
tony.bruegger's picture
Offline
Joined: 31.10.2010
Location: Somerset
GWOA Groups: Members
Re: Ignition - not start GD350

Maybe a combination of faults if you can start with second battery attached

Inter lock switch on lever straight foward - as above

Get battery tested/replaced ,check battery earth ,to bulkhead ,chassis and engine.

LEONIDAS
LEONIDAS's picture
Offline
Joined: 20.12.2003
GWOA Groups: Members
Re: Ignition - not start GD350

I had the same problem recently.  i.e. The Starter will not turn when trying to start  when gear lever in either P or N position. In my case, I disconnected the  neutral from the battery for 1 or 2 minutes, I reconnected the battery and the car started immediately on 3 occasions. I think the problem was the inhibitor switch (safety block switch  combined with reversing light switch)  situated at  the left side of the gear box) that got wet during the recent downpours. In any case, I got a spare switch now just in case the existing one misbehaves again.

arvalente
arvalente's picture
Offline
Joined: 05.04.2009
Location: Portugal
Re: Ignition - not start GD350

Thank you all, I'll check the switch.

It's not a faulty battery, the gear lever is ok, once in a while a was not able to start on P, always on N.

Is it something easy to replace? costly ?

BR

Antonio

gav.helme
gav.helme's picture
Offline
Joined: 29.04.2011
Location: North Lincolnshire
GWOA Groups: Members
Re: Ignition - not start GD350

A000 545 49 06 £44 GBP + VAT

2 X 10mm head bolts hold it on

Just make sure the switch and the rod it locks on to are all lined up

Easy enough for a competant DIYer

Gav