Front Bumper Removal
Hi Guys,
I know this sounds a bit stupid but how do you remove the front bumper on a 463? I presume you have to remove the sump guard to get to the bolts that hold the bumper on,but how do you access the nut holding the guard on closest to the bumper, no idea what to remove to get to this
Thanks in advance
Freddie
you don't need to remove the sump guard, 2 bolts hold it on each side either 17 or 19mm can't recall which but use good quality socket and a long reach wrench as they should be tight. Take care disconnecting the fog lights
w463, the 460 doesn't have built in fog lamps
the extended bar is for levereage, you need to be underneath to access the bolts, I'll try and take a couple of photos
one bolt is inboard, the 2nd is accessible between the bumper and the body work, this is the most difficult to get at as your turns will be very small
Thanks for your swift reply, is this the case on a 463 or just the 461?
Regards
Freddie