offiside dipped headlight wiring.
Sat, 06/11/2010 - 17:01
hiya
I thought the bulb had gone, so I swapped it out with a spare, but no better.
swapped the clusters over to test it and nearside works fine, but the offside dipped beam will not work. it has got to be a wiring fault.
Before I spend hours digging through the wiring with a circuit tester I was hoping someone else has had the problem and the fix?
presumably not a fuse as the nearside, both sidelights and both high beams work fine.
any thoughts please?
Thanks
Jed
I solved it in the end, and thought I would post the solution here in case someone else comes along with the same issue.
using the wiring diagram I found on another 4x4 site.
the list goes (please correct me if I am wrong)
left high beam: fuse 3
left dipped beam: Fuse 5
left parking light: Fuse 1
right high beam: fuse 4
right dipped beam: fuse 6
right parking light: Fuse 2
The wiring diagram is very complicated and I am not an expert, but it does appear that while some fuses protect several systems, the dipped beams left and right have a fuse each that is not shared with anything else.
cheers.