Electric windows not working when the doors are shut, but works fine when a door is opened

6 replies [Last post]
lphong
lphong's picture
Offline
Joined: 27.08.2008
Location: Niedersachsen
GWOA Groups: Members

Hello,

the most singular problem occurred to my LWB G this morning. I opened the driver's window while driving but then it wouldn't close again by using the button. I have check all other 3 buttons and non of them works. But then when I got home, opened the door and tried again... everything works fine again! It is safe to conclude that all the windows only works when one of the doors is opened. 

Any idea??

Thank you in advance!

Pok

landcruiser
landcruiser's picture
Offline
Joined: 06.11.2010
Location: Ashtead, Surrey, UK.
GWOA Groups: Members
Re: Electric windows not working when the doors are shut, ...

Wires between the A pillar and the door or loose multi-plug, though most probably a broken wire. This happens because of the constant flexing of the cables due to the opening and shutting of the door. Also I never set door mirrors to auto fold in on W203 and W211 for a similar reason.

landcruiser
landcruiser's picture
Offline
Joined: 06.11.2010
Location: Ashtead, Surrey, UK.
GWOA Groups: Members
Re: Electric windows not working when the doors are shut, ...

Wires between the A pillar and the door or loose multi-plug, though most probably a broken wire. This happens because of the constant flexing of the cables due to the opening and shutting of the door. Also I never set door mirrors to auto fold in on W203 and W211 for a similar reason.

piggysims
piggysims's picture
Offline
Joined: 02.05.2005
Location: Bristol
Re: Electric windows not working when the doors are shut, ...

I would check the fuses as I think it uses a differant power supply when the doors are open allowing you to put the windows up when the ignition is turned off for when you forget to put them up when leaving the car..

fixwin38
fixwin38's picture
Offline
Joined: 09.07.2006
Location: northern ireland
GWOA Groups: Members
Re: Electric windows not working when the doors are shut, ...

Hi
Corrosion affects the push button switches in the door pillars  which have various functions..remove gently so as not to catch the wires and pull them off the spade connections  they may drop down inside the pillar...clean with a solution of water and bicarbonate of soda  until contacts are bright then allow to dry before applying a very light smear of  petroleum jelly (vaseline) and re installing

lphong
lphong's picture
Offline
Joined: 27.08.2008
Location: Niedersachsen
GWOA Groups: Members
Re: Electric windows not working when the doors are shut, ...

 Yes you're right! Fuse 17 (20A) is out... that is for the radio, the air bag and the central control.

gooch
gooch's picture
Offline
Joined: 04.01.2008
Location: Green - Hertfordshire
GWOA Groups: Committee, Members
Re: Electric windows not working when the doors are shut, ...

Clean that car of yours man!

It's probably all that Coke you drink all over the console! he he he

Hope all is well mate.