CV lock nut socket: To borrow or dims to Make one
As above does anyone have the socket or the dimensions so i can make my own.
Iam using the info gleaned from the clubgwagen artciles so any othe advice or parts sources would be useful.
Hello gib,
I do not have a socket unfortunately, the one I had made, has been stolen amongst my last tools burglary. I bought the castle nut initially and sacrificed a old socket with a similar diameter to the castle nut. Try and use a 1" socket drive if you can, otherwise a half inch drive can do.
Offer the castle nut to the end of socket and mark out, the out line of the lugs. Cut out or hacksaw the (hard work) indents in which the lugs will fit or ask a local engineering shop to cut and machine the socket for you.
Good luck,
JOIN THE GWOA
This website and forum are provided for the benefit of enthusiasts and owners of all Mercedes Benz off road vehicles, in particular the G Wagen. The costs of development, upkeep and provision of the site are met entirely by the annual subscriptions of club members. If you are using the site and are not a member of the G Wagen Owners Association please consider joining. You will have access to areas on the site that are not open to non members, to club trips and meetings and to technical assistance. In addition your contribution (only £25 annually) will help us maintain and develop our website for future users.
Who's new
- Jaffa_JIM_23
- Wrabstar
- GG
- KTMSCANIA22
- 280ge
