Bumpers
Hello All,
Does anyone know of a place where I can get a new front bumper? The MB part number is A463.880.59.70. It appears that they don't have any in the MB dealer network and nothing in Germany ATM. It must be an orginal MB part, (as insurance and MB garage is fixing it) any help greatfully recieved.
Spider1V
(This stems from the accident back in July where a 'Big Rig' rolled back into me)
Spider1V
how ridiculous MB dont have any
Indeed Germany and Austria are awash with them, however not exactly new perhaps, but close enough:
http://www.ebay.de/sch/i.html?_nkw=Stossstange%20G-klasse&rt=nc&_dmpt=DE...
Or try the US, fourbyfourclub.com or Eurotruck importers might have one in stock...
Also you're not limited to that, if they have stock of a tow-pin one you can fit it instead (and relocate the cooler under there)...it's a bit dearer though, last I checked ~£1k.
Hi joe. your best bet would be contacting guido...he often has 2010 onwards bumpers that come from G's that have gone to brabus for upgrades... i am sure he can help you out.
trust him 100%
btw, whats the condition of the one on your G ? I WANT IT....!!!
Hi
I cant believe that MBUK MB Germany or any European dealers have stock??!!!??
Are you happy the part number is correct?
PM me your chassis number and i can double check it if you want
Gav
Sorry Huss, I'm first in line for that bumper. My fists may not be bigger, but my gun cabinet is fuller. ;)
christo look , by the time you get your engine running another bumper will turn up for YOU i am sure......
in other words...
ON YA BIKE MATE !!
christo look , by the time you get your engine running another bumper will turn up for YOU i am sure......
in other words...
ON YA BIKE MATE !!
I got a new W463 front bumper from Guido only a couple of weeks ago. There are only two types, with or without the tow pin jaw. No problem getting one.
ebay@industrytools.de is his email address.
Eddie.
Eddie - OM606 Engine with 123km and MB service history and a OM603 manuel pump done by Myna. Guarenteed at least 260bhp, but more likely closer to 280. Interested?
Huss - I've got to go to an interview on Monday, so you are right, I'll be showing up for a very posh job on a well used 600CC trail bike!
Those Myna-tuned engines are wicked
good luck christo. btw, whats this engine all about ? is it the one in your 463 ? is it turbo or not ?
myna sure know their stuff !!!
rgds hus
hi spider, i love bent round bumpers !!
i will get repaired and fit on the cabrio , this way you will have shares on my cabrio.......
put it in the garage for me please.
rgds hus
A 95 % share minimum, it is a V8 bumper after all ;-)
since we are on the talk of bumpers can anyone assist in finding me a front number plate holder on hinges, the pur 30 460 bumper addition! a pic is attached, i have bumper end caps , it is just the number plate holder ! not having much luck so anyone who can help with this will be greatly appreciated
since we are on the talk of bumpers can anyone assist in finding me a front number plate holder on hinges, the pur 30 460 bumper addition! a pic is attached, i have bumper end caps , it is just the number plate holder ! not having much luck so anyone who can help with this will be greatly appreciated
i promise to look after the bumper and polish it and fit oval fog lights !
"They have replaced the whole front bumper, the Brush guards as well, front fogs and some stuff behind the front Grill."
Does that mean the engine bitty thingy, smelly, purry can't pour enough petroly into it thingy?
Tried to insert a smiley but to no avail
With all the bits they've replaced, you could have had them fit the face-lift parts: new 3-bar grill and round fog lamps
The chrome grill would suit your bling-tastic nature and sparking disposition. ;)
You are very welcome sir, all this crap in my head has to go somewhere.;-}
All,
Many thanks for your ideas and thoughts. Am processing them with MB.
Spider1V
P.s
The bumper was totally bent around - however if you want the parts can you let me know?
AudioMinx has dibbs on the Brush Guard pillers. (only slightly dented)