460 interior lights not working
My 460 interior lights are not working. I bought new bulbs - no joy!
They are not working on door opening, or on the manual switches. On the door opening, I can hear the relay click - but no light... So maybe the relay is working fine - but the current is not getting to the lights? Thoughts or suggestions please...
try earthing the lamps when they are pulled out with a wire to the body... that will narrow it down a bit if its an earth problem... if it is the major earthing point is behind left rear pillar trim as you face the back of the car..
ive included a pic i took of mine a month ago... its the clump of brown wires near the top of the pic.
good luck
Not sure if they work on the same principle like a 463, with a push rod type switch. Over time they do get clogged up and a simple squirt with WD40 brings them back (or did in my case)
Failing that - I have no idea.
Hope that helps
Spider1V
if its not the switch which you say is working have a look at the connections inside the light
make sure they are not touching the roof (earthing out) or showing any signs of
over heating these lights are not the best made thing and cheap to buy
adrian
Have you checked the fuse?
I think relay will still click if fuse blown, or fuse might be bad connection
Thanks for these thoughts. I'll give them a go...